From 43394c8a8908442982e3a7e25975c31b3c952923 Mon Sep 17 00:00:00 2001 From: Nikolas Date: Sun, 27 Oct 2024 12:52:55 +0200 Subject: root --- 3rdparty/include/SDL2/SDL_audio.h | 859 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 859 insertions(+) create mode 100644 3rdparty/include/SDL2/SDL_audio.h (limited to '3rdparty/include/SDL2/SDL_audio.h') diff --git a/3rdparty/include/SDL2/SDL_audio.h b/3rdparty/include/SDL2/SDL_audio.h new file mode 100644 index 0000000..4ba3491 --- /dev/null +++ b/3rdparty/include/SDL2/SDL_audio.h @@ -0,0 +1,859 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2020 Sam Lantinga + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_audio.h + * + * Access to the raw audio mixing buffer for the SDL library. + */ + +#ifndef SDL_audio_h_ +#define SDL_audio_h_ + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_endian.h" +#include "SDL_mutex.h" +#include "SDL_thread.h" +#include "SDL_rwops.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Audio format flags. + * + * These are what the 16 bits in SDL_AudioFormat currently mean... + * (Unspecified bits are always zero). + * + * \verbatim + ++-----------------------sample is signed if set + || + || ++-----------sample is bigendian if set + || || + || || ++---sample is float if set + || || || + || || || +---sample bit size---+ + || || || | | + 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 + \endverbatim + * + * There are macros in SDL 2.0 and later to query these bits. + */ +typedef Uint16 SDL_AudioFormat; + +/** + * \name Audio flags + */ +/* @{ */ + +#define SDL_AUDIO_MASK_BITSIZE (0xFF) +#define SDL_AUDIO_MASK_DATATYPE (1<<8) +#define SDL_AUDIO_MASK_ENDIAN (1<<12) +#define SDL_AUDIO_MASK_SIGNED (1<<15) +#define SDL_AUDIO_BITSIZE(x) (x & SDL_AUDIO_MASK_BITSIZE) +#define SDL_AUDIO_ISFLOAT(x) (x & SDL_AUDIO_MASK_DATATYPE) +#define SDL_AUDIO_ISBIGENDIAN(x) (x & SDL_AUDIO_MASK_ENDIAN) +#define SDL_AUDIO_ISSIGNED(x) (x & SDL_AUDIO_MASK_SIGNED) +#define SDL_AUDIO_ISINT(x) (!SDL_AUDIO_ISFLOAT(x)) +#define SDL_AUDIO_ISLITTLEENDIAN(x) (!SDL_AUDIO_ISBIGENDIAN(x)) +#define SDL_AUDIO_ISUNSIGNED(x) (!SDL_AUDIO_ISSIGNED(x)) + +/** + * \name Audio format flags + * + * Defaults to LSB byte order. + */ +/* @{ */ +#define AUDIO_U8 0x0008 /**< Unsigned 8-bit samples */ +#define AUDIO_S8 0x8008 /**< Signed 8-bit samples */ +#define AUDIO_U16LSB 0x0010 /**< Unsigned 16-bit samples */ +#define AUDIO_S16LSB 0x8010 /**< Signed 16-bit samples */ +#define AUDIO_U16MSB 0x1010 /**< As above, but big-endian byte order */ +#define AUDIO_S16MSB 0x9010 /**< As above, but big-endian byte order */ +#define AUDIO_U16 AUDIO_U16LSB +#define AUDIO_S16 AUDIO_S16LSB +/* @} */ + +/** + * \name int32 support + */ +/* @{ */ +#define AUDIO_S32LSB 0x8020 /**< 32-bit integer samples */ +#define AUDIO_S32MSB 0x9020 /**< As above, but big-endian byte order */ +#define AUDIO_S32 AUDIO_S32LSB +/* @} */ + +/** + * \name float32 support + */ +/* @{ */ +#define AUDIO_F32LSB 0x8120 /**< 32-bit floating point samples */ +#define AUDIO_F32MSB 0x9120 /**< As above, but big-endian byte order */ +#define AUDIO_F32 AUDIO_F32LSB +/* @} */ + +/** + * \name Native audio byte ordering + */ +/* @{ */ +#if SDL_BYTEORDER == SDL_LIL_ENDIAN +#define AUDIO_U16SYS AUDIO_U16LSB +#define AUDIO_S16SYS AUDIO_S16LSB +#define AUDIO_S32SYS AUDIO_S32LSB +#define AUDIO_F32SYS AUDIO_F32LSB +#else +#define AUDIO_U16SYS AUDIO_U16MSB +#define AUDIO_S16SYS AUDIO_S16MSB +#define AUDIO_S32SYS AUDIO_S32MSB +#define AUDIO_F32SYS AUDIO_F32MSB +#endif +/* @} */ + +/** + * \name Allow change flags + * + * Which audio format changes are allowed when opening a device. + */ +/* @{ */ +#define SDL_AUDIO_ALLOW_FREQUENCY_CHANGE 0x00000001 +#define SDL_AUDIO_ALLOW_FORMAT_CHANGE 0x00000002 +#define SDL_AUDIO_ALLOW_CHANNELS_CHANGE 0x00000004 +#define SDL_AUDIO_ALLOW_SAMPLES_CHANGE 0x00000008 +#define SDL_AUDIO_ALLOW_ANY_CHANGE (SDL_AUDIO_ALLOW_FREQUENCY_CHANGE|SDL_AUDIO_ALLOW_FORMAT_CHANGE|SDL_AUDIO_ALLOW_CHANNELS_CHANGE|SDL_AUDIO_ALLOW_SAMPLES_CHANGE) +/* @} */ + +/* @} *//* Audio flags */ + +/** + * This function is called when the audio device needs more data. + * + * \param userdata An application-specific parameter saved in + * the SDL_AudioSpec structure + * \param stream A pointer to the audio data buffer. + * \param len The length of that buffer in bytes. + * + * Once the callback returns, the buffer will no longer be valid. + * Stereo samples are stored in a LRLRLR ordering. + * + * You can choose to avoid callbacks and use SDL_QueueAudio() instead, if + * you like. Just open your audio device with a NULL callback. + */ +typedef void (SDLCALL * SDL_AudioCallback) (void *userdata, Uint8 * stream, + int len); + +/** + * The calculated values in this structure are calculated by SDL_OpenAudio(). + * + * For multi-channel audio, the default SDL channel mapping is: + * 2: FL FR (stereo) + * 3: FL FR LFE (2.1 surround) + * 4: FL FR BL BR (quad) + * 5: FL FR FC BL BR (quad + center) + * 6: FL FR FC LFE SL SR (5.1 surround - last two can also be BL BR) + * 7: FL FR FC LFE BC SL SR (6.1 surround) + * 8: FL FR FC LFE BL BR SL SR (7.1 surround) + */ +typedef struct SDL_AudioSpec +{ + int freq; /**< DSP frequency -- samples per second */ + SDL_AudioFormat format; /**< Audio data format */ + Uint8 channels; /**< Number of channels: 1 mono, 2 stereo */ + Uint8 silence; /**< Audio buffer silence value (calculated) */ + Uint16 samples; /**< Audio buffer size in sample FRAMES (total samples divided by channel count) */ + Uint16 padding; /**< Necessary for some compile environments */ + Uint32 size; /**< Audio buffer size in bytes (calculated) */ + SDL_AudioCallback callback; /**< Callback that feeds the audio device (NULL to use SDL_QueueAudio()). */ + void *userdata; /**< Userdata passed to callback (ignored for NULL callbacks). */ +} SDL_AudioSpec; + + +struct SDL_AudioCVT; +typedef void (SDLCALL * SDL_AudioFilter) (struct SDL_AudioCVT * cvt, + SDL_AudioFormat format); + +/** + * \brief Upper limit of filters in SDL_AudioCVT + * + * The maximum number of SDL_AudioFilter functions in SDL_AudioCVT is + * currently limited to 9. The SDL_AudioCVT.filters array has 10 pointers, + * one of which is the terminating NULL pointer. + */ +#define SDL_AUDIOCVT_MAX_FILTERS 9 + +/** + * \struct SDL_AudioCVT + * \brief A structure to hold a set of audio conversion filters and buffers. + * + * Note that various parts of the conversion pipeline can take advantage + * of SIMD operations (like SSE2, for example). SDL_AudioCVT doesn't require + * you to pass it aligned data, but can possibly run much faster if you + * set both its (buf) field to a pointer that is aligned to 16 bytes, and its + * (len) field to something that's a multiple of 16, if possible. + */ +#ifdef __GNUC__ +/* This structure is 84 bytes on 32-bit architectures, make sure GCC doesn't + pad it out to 88 bytes to guarantee ABI compatibility between compilers. + vvv + The next time we rev the ABI, make sure to size the ints and add padding. +*/ +#define SDL_AUDIOCVT_PACKED __attribute__((packed)) +#else +#define SDL_AUDIOCVT_PACKED +#endif +/* */ +typedef struct SDL_AudioCVT +{ + int needed; /**< Set to 1 if conversion possible */ + SDL_AudioFormat src_format; /**< Source audio format */ + SDL_AudioFormat dst_format; /**< Target audio format */ + double rate_incr; /**< Rate conversion increment */ + Uint8 *buf; /**< Buffer to hold entire audio data */ + int len; /**< Length of original audio buffer */ + int len_cvt; /**< Length of converted audio buffer */ + int len_mult; /**< buffer must be len*len_mult big */ + double len_ratio; /**< Given len, final size is len*len_ratio */ + SDL_AudioFilter filters[SDL_AUDIOCVT_MAX_FILTERS + 1]; /**< NULL-terminated list of filter functions */ + int filter_index; /**< Current audio conversion function */ +} SDL_AUDIOCVT_PACKED SDL_AudioCVT; + + +/* Function prototypes */ + +/** + * \name Driver discovery functions + * + * These functions return the list of built in audio drivers, in the + * order that they are normally initialized by default. + */ +/* @{ */ +extern DECLSPEC int SDLCALL SDL_GetNumAudioDrivers(void); +extern DECLSPEC const char *SDLCALL SDL_GetAudioDriver(int index); +/* @} */ + +/** + * \name Initialization and cleanup + * + * \internal These functions are used internally, and should not be used unless + * you have a specific need to specify the audio driver you want to + * use. You should normally use SDL_Init() or SDL_InitSubSystem(). + */ +/* @{ */ +extern DECLSPEC int SDLCALL SDL_AudioInit(const char *driver_name); +extern DECLSPEC void SDLCALL SDL_AudioQuit(void); +/* @} */ + +/** + * This function returns the name of the current audio driver, or NULL + * if no driver has been initialized. + */ +extern DECLSPEC const char *SDLCALL SDL_GetCurrentAudioDriver(void); + +/** + * This function opens the audio device with the desired parameters, and + * returns 0 if successful, placing the actual hardware parameters in the + * structure pointed to by \c obtained. If \c obtained is NULL, the audio + * data passed to the callback function will be guaranteed to be in the + * requested format, and will be automatically converted to the hardware + * audio format if necessary. This function returns -1 if it failed + * to open the audio device, or couldn't set up the audio thread. + * + * When filling in the desired audio spec structure, + * - \c desired->freq should be the desired audio frequency in samples-per- + * second. + * - \c desired->format should be the desired audio format. + * - \c desired->samples is the desired size of the audio buffer, in + * samples. This number should be a power of two, and may be adjusted by + * the audio driver to a value more suitable for the hardware. Good values + * seem to range between 512 and 8096 inclusive, depending on the + * application and CPU speed. Smaller values yield faster response time, + * but can lead to underflow if the application is doing heavy processing + * and cannot fill the audio buffer in time. A stereo sample consists of + * both right and left channels in LR ordering. + * Note that the number of samples is directly related to time by the + * following formula: \code ms = (samples*1000)/freq \endcode + * - \c desired->size is the size in bytes of the audio buffer, and is + * calculated by SDL_OpenAudio(). + * - \c desired->silence is the value used to set the buffer to silence, + * and is calculated by SDL_OpenAudio(). + * - \c desired->callback should be set to a function that will be called + * when the audio device is ready for more data. It is passed a pointer + * to the audio buffer, and the length in bytes of the audio buffer. + * This function usually runs in a separate thread, and so you should + * protect data structures that it accesses by calling SDL_LockAudio() + * and SDL_UnlockAudio() in your code. Alternately, you may pass a NULL + * pointer here, and call SDL_QueueAudio() with some frequency, to queue + * more audio samples to be played (or for capture devices, call + * SDL_DequeueAudio() with some frequency, to obtain audio samples). + * - \c desired->userdata is passed as the first parameter to your callback + * function. If you passed a NULL callback, this value is ignored. + * + * The audio device starts out playing silence when it's opened, and should + * be enabled for playing by calling \c SDL_PauseAudio(0) when you are ready + * for your audio callback function to be called. Since the audio driver + * may modify the requested size of the audio buffer, you should allocate + * any local mixing buffers after you open the audio device. + */ +extern DECLSPEC int SDLCALL SDL_OpenAudio(SDL_AudioSpec * desired, + SDL_AudioSpec * obtained); + +/** + * SDL Audio Device IDs. + * + * A successful call to SDL_OpenAudio() is always device id 1, and legacy + * SDL audio APIs assume you want this device ID. SDL_OpenAudioDevice() calls + * always returns devices >= 2 on success. The legacy calls are good both + * for backwards compatibility and when you don't care about multiple, + * specific, or capture devices. + */ +typedef Uint32 SDL_AudioDeviceID; + +/** + * Get the number of available devices exposed by the current driver. + * Only valid after a successfully initializing the audio subsystem. + * Returns -1 if an explicit list of devices can't be determined; this is + * not an error. For example, if SDL is set up to talk to a remote audio + * server, it can't list every one available on the Internet, but it will + * still allow a specific host to be specified to SDL_OpenAudioDevice(). + * + * In many common cases, when this function returns a value <= 0, it can still + * successfully open the default device (NULL for first argument of + * SDL_OpenAudioDevice()). + */ +extern DECLSPEC int SDLCALL SDL_GetNumAudioDevices(int iscapture); + +/** + * Get the human-readable name of a specific audio device. + * Must be a value between 0 and (number of audio devices-1). + * Only valid after a successfully initializing the audio subsystem. + * The values returned by this function reflect the latest call to + * SDL_GetNumAudioDevices(); recall that function to redetect available + * hardware. + * + * The string returned by this function is UTF-8 encoded, read-only, and + * managed internally. You are not to free it. If you need to keep the + * string for any length of time, you should make your own copy of it, as it + * will be invalid next time any of several other SDL functions is called. + */ +extern DECLSPEC const char *SDLCALL SDL_GetAudioDeviceName(int index, + int iscapture); + + +/** + * Open a specific audio device. Passing in a device name of NULL requests + * the most reasonable default (and is equivalent to calling SDL_OpenAudio()). + * + * The device name is a UTF-8 string reported by SDL_GetAudioDeviceName(), but + * some drivers allow arbitrary and driver-specific strings, such as a + * hostname/IP address for a remote audio server, or a filename in the + * diskaudio driver. + * + * \return 0 on error, a valid device ID that is >= 2 on success. + * + * SDL_OpenAudio(), unlike this function, always acts on device ID 1. + */ +extern DECLSPEC SDL_AudioDeviceID SDLCALL SDL_OpenAudioDevice(const char + *device, + int iscapture, + const + SDL_AudioSpec * + desired, + SDL_AudioSpec * + obtained, + int + allowed_changes); + + + +/** + * \name Audio state + * + * Get the current audio state. + */ +/* @{ */ +typedef enum +{ + SDL_AUDIO_STOPPED = 0, + SDL_AUDIO_PLAYING, + SDL_AUDIO_PAUSED +} SDL_AudioStatus; +extern DECLSPEC SDL_AudioStatus SDLCALL SDL_GetAudioStatus(void); + +extern DECLSPEC SDL_AudioStatus SDLCALL +SDL_GetAudioDeviceStatus(SDL_AudioDeviceID dev); +/* @} *//* Audio State */ + +/** + * \name Pause audio functions + * + * These functions pause and unpause the audio callback processing. + * They should be called with a parameter of 0 after opening the audio + * device to start playing sound. This is so you can safely initialize + * data for your callback function after opening the audio device. + * Silence will be written to the audio device during the pause. + */ +/* @{ */ +extern DECLSPEC void SDLCALL SDL_PauseAudio(int pause_on); +extern DECLSPEC void SDLCALL SDL_PauseAudioDevice(SDL_AudioDeviceID dev, + int pause_on); +/* @} *//* Pause audio functions */ + +/** + * \brief Load the audio data of a WAVE file into memory + * + * Loading a WAVE file requires \c src, \c spec, \c audio_buf and \c audio_len + * to be valid pointers. The entire data portion of the file is then loaded + * into memory and decoded if necessary. + * + * If \c freesrc is non-zero, the data source gets automatically closed and + * freed before the function returns. + * + * Supported are RIFF WAVE files with the formats PCM (8, 16, 24, and 32 bits), + * IEEE Float (32 bits), Microsoft ADPCM and IMA ADPCM (4 bits), and A-law and + * ยต-law (8 bits). Other formats are currently unsupported and cause an error. + * + * If this function succeeds, the pointer returned by it is equal to \c spec + * and the pointer to the audio data allocated by the function is written to + * \c audio_buf and its length in bytes to \c audio_len. The \ref SDL_AudioSpec + * members \c freq, \c channels, and \c format are set to the values of the + * audio data in the buffer. The \c samples member is set to a sane default and + * all others are set to zero. + * + * It's necessary to use SDL_FreeWAV() to free the audio data returned in + * \c audio_buf when it is no longer used. + * + * Because of the underspecification of the Waveform format, there are many + * problematic files in the wild that cause issues with strict decoders. To + * provide compatibility with these files, this decoder is lenient in regards + * to the truncation of the file, the fact chunk, and the size of the RIFF + * chunk. The hints SDL_HINT_WAVE_RIFF_CHUNK_SIZE, SDL_HINT_WAVE_TRUNCATION, + * and SDL_HINT_WAVE_FACT_CHUNK can be used to tune the behavior of the + * loading process. + * + * Any file that is invalid (due to truncation, corruption, or wrong values in + * the headers), too big, or unsupported causes an error. Additionally, any + * critical I/O error from the data source will terminate the loading process + * with an error. The function returns NULL on error and in all cases (with the + * exception of \c src being NULL), an appropriate error message will be set. + * + * It is required that the data source supports seeking. + * + * Example: + * \code + * SDL_LoadWAV_RW(SDL_RWFromFile("sample.wav", "rb"), 1, ...); + * \endcode + * + * \param src The data source with the WAVE data + * \param freesrc A integer value that makes the function close the data source if non-zero + * \param spec A pointer filled with the audio format of the audio data + * \param audio_buf A pointer filled with the audio data allocated by the function + * \param audio_len A pointer filled with the length of the audio data buffer in bytes + * \return NULL on error, or non-NULL on success. + */ +extern DECLSPEC SDL_AudioSpec *SDLCALL SDL_LoadWAV_RW(SDL_RWops * src, + int freesrc, + SDL_AudioSpec * spec, + Uint8 ** audio_buf, + Uint32 * audio_len); + +/** + * Loads a WAV from a file. + * Compatibility convenience function. + */ +#define SDL_LoadWAV(file, spec, audio_buf, audio_len) \ + SDL_LoadWAV_RW(SDL_RWFromFile(file, "rb"),1, spec,audio_buf,audio_len) + +/** + * This function frees data previously allocated with SDL_LoadWAV_RW() + */ +extern DECLSPEC void SDLCALL SDL_FreeWAV(Uint8 * audio_buf); + +/** + * This function takes a source format and rate and a destination format + * and rate, and initializes the \c cvt structure with information needed + * by SDL_ConvertAudio() to convert a buffer of audio data from one format + * to the other. An unsupported format causes an error and -1 will be returned. + * + * \return 0 if no conversion is needed, 1 if the audio filter is set up, + * or -1 on error. + */ +extern DECLSPEC int SDLCALL SDL_BuildAudioCVT(SDL_AudioCVT * cvt, + SDL_AudioFormat src_format, + Uint8 src_channels, + int src_rate, + SDL_AudioFormat dst_format, + Uint8 dst_channels, + int dst_rate); + +/** + * Once you have initialized the \c cvt structure using SDL_BuildAudioCVT(), + * created an audio buffer \c cvt->buf, and filled it with \c cvt->len bytes of + * audio data in the source format, this function will convert it in-place + * to the desired format. + * + * The data conversion may expand the size of the audio data, so the buffer + * \c cvt->buf should be allocated after the \c cvt structure is initialized by + * SDL_BuildAudioCVT(), and should be \c cvt->len*cvt->len_mult bytes long. + * + * \return 0 on success or -1 if \c cvt->buf is NULL. + */ +extern DECLSPEC int SDLCALL SDL_ConvertAudio(SDL_AudioCVT * cvt); + +/* SDL_AudioStream is a new audio conversion interface. + The benefits vs SDL_AudioCVT: + - it can handle resampling data in chunks without generating + artifacts, when it doesn't have the complete buffer available. + - it can handle incoming data in any variable size. + - You push data as you have it, and pull it when you need it + */ +/* this is opaque to the outside world. */ +struct _SDL_AudioStream; +typedef struct _SDL_AudioStream SDL_AudioStream; + +/** + * Create a new audio stream + * + * \param src_format The format of the source audio + * \param src_channels The number of channels of the source audio + * \param src_rate The sampling rate of the source audio + * \param dst_format The format of the desired audio output + * \param dst_channels The number of channels of the desired audio output + * \param dst_rate The sampling rate of the desired audio output + * \return 0 on success, or -1 on error. + * + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC SDL_AudioStream * SDLCALL SDL_NewAudioStream(const SDL_AudioFormat src_format, + const Uint8 src_channels, + const int src_rate, + const SDL_AudioFormat dst_format, + const Uint8 dst_channels, + const int dst_rate); + +/** + * Add data to be converted/resampled to the stream + * + * \param stream The stream the audio data is being added to + * \param buf A pointer to the audio data to add + * \param len The number of bytes to write to the stream + * \return 0 on success, or -1 on error. + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC int SDLCALL SDL_AudioStreamPut(SDL_AudioStream *stream, const void *buf, int len); + +/** + * Get converted/resampled data from the stream + * + * \param stream The stream the audio is being requested from + * \param buf A buffer to fill with audio data + * \param len The maximum number of bytes to fill + * \return The number of bytes read from the stream, or -1 on error + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC int SDLCALL SDL_AudioStreamGet(SDL_AudioStream *stream, void *buf, int len); + +/** + * Get the number of converted/resampled bytes available. The stream may be + * buffering data behind the scenes until it has enough to resample + * correctly, so this number might be lower than what you expect, or even + * be zero. Add more data or flush the stream if you need the data now. + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC int SDLCALL SDL_AudioStreamAvailable(SDL_AudioStream *stream); + +/** + * Tell the stream that you're done sending data, and anything being buffered + * should be converted/resampled and made available immediately. + * + * It is legal to add more data to a stream after flushing, but there will + * be audio gaps in the output. Generally this is intended to signal the + * end of input, so the complete output becomes available. + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC int SDLCALL SDL_AudioStreamFlush(SDL_AudioStream *stream); + +/** + * Clear any pending data in the stream without converting it + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC void SDLCALL SDL_AudioStreamClear(SDL_AudioStream *stream); + +/** + * Free an audio stream + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + */ +extern DECLSPEC void SDLCALL SDL_FreeAudioStream(SDL_AudioStream *stream); + +#define SDL_MIX_MAXVOLUME 128 +/** + * This takes two audio buffers of the playing audio format and mixes + * them, performing addition, volume adjustment, and overflow clipping. + * The volume ranges from 0 - 128, and should be set to ::SDL_MIX_MAXVOLUME + * for full audio volume. Note this does not change hardware volume. + * This is provided for convenience -- you can mix your own audio data. + */ +extern DECLSPEC void SDLCALL SDL_MixAudio(Uint8 * dst, const Uint8 * src, + Uint32 len, int volume); + +/** + * This works like SDL_MixAudio(), but you specify the audio format instead of + * using the format of audio device 1. Thus it can be used when no audio + * device is open at all. + */ +extern DECLSPEC void SDLCALL SDL_MixAudioFormat(Uint8 * dst, + const Uint8 * src, + SDL_AudioFormat format, + Uint32 len, int volume); + +/** + * Queue more audio on non-callback devices. + * + * (If you are looking to retrieve queued audio from a non-callback capture + * device, you want SDL_DequeueAudio() instead. This will return -1 to + * signify an error if you use it with capture devices.) + * + * SDL offers two ways to feed audio to the device: you can either supply a + * callback that SDL triggers with some frequency to obtain more audio + * (pull method), or you can supply no callback, and then SDL will expect + * you to supply data at regular intervals (push method) with this function. + * + * There are no limits on the amount of data you can queue, short of + * exhaustion of address space. Queued data will drain to the device as + * necessary without further intervention from you. If the device needs + * audio but there is not enough queued, it will play silence to make up + * the difference. This means you will have skips in your audio playback + * if you aren't routinely queueing sufficient data. + * + * This function copies the supplied data, so you are safe to free it when + * the function returns. This function is thread-safe, but queueing to the + * same device from two threads at once does not promise which buffer will + * be queued first. + * + * You may not queue audio on a device that is using an application-supplied + * callback; doing so returns an error. You have to use the audio callback + * or queue audio with this function, but not both. + * + * You should not call SDL_LockAudio() on the device before queueing; SDL + * handles locking internally for this function. + * + * \param dev The device ID to which we will queue audio. + * \param data The data to queue to the device for later playback. + * \param len The number of bytes (not samples!) to which (data) points. + * \return 0 on success, or -1 on error. + * + * \sa SDL_GetQueuedAudioSize + * \sa SDL_ClearQueuedAudio + */ +extern DECLSPEC int SDLCALL SDL_QueueAudio(SDL_AudioDeviceID dev, const void *data, Uint32 len); + +/** + * Dequeue more audio on non-callback devices. + * + * (If you are looking to queue audio for output on a non-callback playback + * device, you want SDL_QueueAudio() instead. This will always return 0 + * if you use it with playback devices.) + * + * SDL offers two ways to retrieve audio from a capture device: you can + * either supply a callback that SDL triggers with some frequency as the + * device records more audio data, (push method), or you can supply no + * callback, and then SDL will expect you to retrieve data at regular + * intervals (pull method) with this function. + * + * There are no limits on the amount of data you can queue, short of + * exhaustion of address space. Data from the device will keep queuing as + * necessary without further intervention from you. This means you will + * eventually run out of memory if you aren't routinely dequeueing data. + * + * Capture devices will not queue data when paused; if you are expecting + * to not need captured audio for some length of time, use + * SDL_PauseAudioDevice() to stop the capture device from queueing more + * data. This can be useful during, say, level loading times. When + * unpaused, capture devices will start queueing data from that point, + * having flushed any capturable data available while paused. + * + * This function is thread-safe, but dequeueing from the same device from + * two threads at once does not promise which thread will dequeued data + * first. + * + * You may not dequeue audio from a device that is using an + * application-supplied callback; doing so returns an error. You have to use + * the audio callback, or dequeue audio with this function, but not both. + * + * You should not call SDL_LockAudio() on the device before queueing; SDL + * handles locking internally for this function. + * + * \param dev The device ID from which we will dequeue audio. + * \param data A pointer into where audio data should be copied. + * \param len The number of bytes (not samples!) to which (data) points. + * \return number of bytes dequeued, which could be less than requested. + * + * \sa SDL_GetQueuedAudioSize + * \sa SDL_ClearQueuedAudio + */ +extern DECLSPEC Uint32 SDLCALL SDL_DequeueAudio(SDL_AudioDeviceID dev, void *data, Uint32 len); + +/** + * Get the number of bytes of still-queued audio. + * + * For playback device: + * + * This is the number of bytes that have been queued for playback with + * SDL_QueueAudio(), but have not yet been sent to the hardware. This + * number may shrink at any time, so this only informs of pending data. + * + * Once we've sent it to the hardware, this function can not decide the + * exact byte boundary of what has been played. It's possible that we just + * gave the hardware several kilobytes right before you called this + * function, but it hasn't played any of it yet, or maybe half of it, etc. + * + * For capture devices: + * + * This is the number of bytes that have been captured by the device and + * are waiting for you to dequeue. This number may grow at any time, so + * this only informs of the lower-bound of available data. + * + * You may not queue audio on a device that is using an application-supplied + * callback; calling this function on such a device always returns 0. + * You have to queue audio with SDL_QueueAudio()/SDL_DequeueAudio(), or use + * the audio callback, but not both. + * + * You should not call SDL_LockAudio() on the device before querying; SDL + * handles locking internally for this function. + * + * \param dev The device ID of which we will query queued audio size. + * \return Number of bytes (not samples!) of queued audio. + * + * \sa SDL_QueueAudio + * \sa SDL_ClearQueuedAudio + */ +extern DECLSPEC Uint32 SDLCALL SDL_GetQueuedAudioSize(SDL_AudioDeviceID dev); + +/** + * Drop any queued audio data. For playback devices, this is any queued data + * still waiting to be submitted to the hardware. For capture devices, this + * is any data that was queued by the device that hasn't yet been dequeued by + * the application. + * + * Immediately after this call, SDL_GetQueuedAudioSize() will return 0. For + * playback devices, the hardware will start playing silence if more audio + * isn't queued. Unpaused capture devices will start filling the queue again + * as soon as they have more data available (which, depending on the state + * of the hardware and the thread, could be before this function call + * returns!). + * + * This will not prevent playback of queued audio that's already been sent + * to the hardware, as we can not undo that, so expect there to be some + * fraction of a second of audio that might still be heard. This can be + * useful if you want to, say, drop any pending music during a level change + * in your game. + * + * You may not queue audio on a device that is using an application-supplied + * callback; calling this function on such a device is always a no-op. + * You have to queue audio with SDL_QueueAudio()/SDL_DequeueAudio(), or use + * the audio callback, but not both. + * + * You should not call SDL_LockAudio() on the device before clearing the + * queue; SDL handles locking internally for this function. + * + * This function always succeeds and thus returns void. + * + * \param dev The device ID of which to clear the audio queue. + * + * \sa SDL_QueueAudio + * \sa SDL_GetQueuedAudioSize + */ +extern DECLSPEC void SDLCALL SDL_ClearQueuedAudio(SDL_AudioDeviceID dev); + + +/** + * \name Audio lock functions + * + * The lock manipulated by these functions protects the callback function. + * During a SDL_LockAudio()/SDL_UnlockAudio() pair, you can be guaranteed that + * the callback function is not running. Do not call these from the callback + * function or you will cause deadlock. + */ +/* @{ */ +extern DECLSPEC void SDLCALL SDL_LockAudio(void); +extern DECLSPEC void SDLCALL SDL_LockAudioDevice(SDL_AudioDeviceID dev); +extern DECLSPEC void SDLCALL SDL_UnlockAudio(void); +extern DECLSPEC void SDLCALL SDL_UnlockAudioDevice(SDL_AudioDeviceID dev); +/* @} *//* Audio lock functions */ + +/** + * This function shuts down audio processing and closes the audio device. + */ +extern DECLSPEC void SDLCALL SDL_CloseAudio(void); +extern DECLSPEC void SDLCALL SDL_CloseAudioDevice(SDL_AudioDeviceID dev); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* SDL_audio_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ -- cgit v1.2.3